mixed silicone rubberlocation：index>Product>mixed silicone rubber
- --introduce
-
Characteristic：High transparency; Harmless to the human body; Heat resistance; Cold resistance; Electrical insulation; Drug resistance; Hot water resistance
Applications: used for food grade, medical products with special purposes, like medical hose , drinking water pipes or body fluid guide tube.
Product after curing can be used between -50℃~250℃.
Pre vulcanization
Squeeze-7030
Squeeze -7050
Squeeze -7060
Squeeze -7070
Squeeze -7080
Surface
Transparent
Transparent
Transparent
Transparent
Transparent
Proportion
1.10±0.02
1.15±0.02
1.18±0.02
1.22±0.02
1.22±0.02
Curing ingredient
C-8
C-8
C-8
C-8
C-8
Standard dosage of vulcanizing agent
1
1
1
1
1
Post vulcanization conditions of vulcanization：170℃×5min×2mm
Surface
High transparency
High transparency
High transparency
High transparency
High transparency
Line shrinkage≤
3.3
3.1
3.0
2.9
2.8
Solidity(HA)
30±2
50±2
60±2
70±2
80±2
Tensile strength(Mpa) ≥
7
8.5
8.8
9
8.5
Elongation at break(%)≥
900
600
500
450
300
Tension set(%)≤
5
5
6
8
8
Tearing strength(KN/M) ≥
15
20
30
40
40
Breakdown voltage KV/mm ≥
22
22
22
22
22
Volume resistivity
1×10^14
1×10^14
1×10^14
1×10^14
1×10^14
Flame resistance
FV-1
FV-1
FV-1
FV-1
FV-1
Recommend use 2,4-Dimethyl-2,4-di(tert-butylperoxy)hexane
c-8: White paste 2,5-Dimethyl-2,5-di(tert-butylperoxy)hexane
The main components of silicone rubber: methyl vinyl silicone rubber, hydrated silica, constitution controller, mold discharging agent
This information is for reference only, if any doubt to the measured data shall prevail;
Vulcanizing agent varieties, the amount of the actual production requirements to prevail;
The vulcanization conditions are subject to the actual production requirements.
- pervious： next：nonego back
